5 Missing Qi2 Accessories Phone Straps Already Solve

Qi2 fixed charging alignment. It didn't fix the thing that actually gets phones broken or lost: the moment between the mount and your hand. We think the better fix isn't another magnet. It's not having to think about where the phone is at all, because it's already attached to you. Here are five accessories the Qi2 world is still missing, and why a strap already covers the gap on two of them.

Why Qi2 still has gaps in 2026

Qi2's magnet alignment standard has matured. iPhones have shipped with it for years, and Android is catching up piece by piece: Samsung's Galaxy S25 line added official magnetic cases rather than built-in magnets, which still lets the existing Qi2 wallet and mount ecosystem work on a phone that wasn't originally designed for it. That's progress, but it's also a patch, not a native fit, and pricing on the hardware side hasn't caught up to the hype either.

CNET reported "Sticking within Belkin, a similar two-in-one charger that supports Qi2 for 15W wireless charging and magnets is available for a much more affordable $70." That's a meaningfully cheaper entry point than the first wave of Qi2 hardware, and it suggests the category is maturing the way most phone accessory markets do: fast on charging specs, slower on the parts that don't show up in a spec sheet.

That gap between "what Qi2 can technically do" and "what the accessory market has actually built" is where the real product ideas hide. Charging speed and magnet strength get iterated on every generation. What doesn't get solved nearly as fast is the stuff that happens between charges: how the phone stays attached to a bag, a bike, a wrist, or a body when it's not sitting on a pad.

Five Qi2 accessories people keep wishing existed

Talk to anyone who's tried to build a full Qi2 setup and the same wishlist comes up. None of these require new magnet science, just someone deciding to build them.

- A charging stand that uses both faces of a power bank, not just one, so two devices can sit on a single brick instead of one side going unused.

- A universal mount adapter that lets the same magnetic phone move between a car vent, a bike stem, and a tripod without buying three separate mount bodies.

- A slimmer battery pack that doesn't add the bulk most magnetic power banks currently tack onto a phone that's already thin.

- A genuine cross-brand magnet spec, so a mount bought for one phone brand works on another without a compatibility case stacked in between.

- A simple way to know a magnetic accessory has actually clicked into place, since a half-seated mount on a bike or dash is how phones end up on pavement.

Notice what most of these have in common: they're about keeping the phone in place and in use, not about making it charge faster. Charging speed is basically solved. Staying attached is the part nobody's shipped a great answer for yet.

The one job no magnet accessory does

Every item on that wishlist assumes the phone is sitting somewhere: a mount, a stand, a dash. None of them answer what happens when the phone comes off the mount, which is still the most common way a phone gets dropped or left behind. A magnet is strong until it isn't, usually right as a bike hits a pothole or a bag gets bumped on a train.

We built Phone Loops around a different bet: the drop you prevent beats the accessory that catches the fall after. A magnetic mount is a great answer to "where does my phone sit while I'm using it." A strap is the answer to "where is my phone when I'm not looking at it," which is most of the day. That's not a competing feature, it's the feature nobody's building into Qi2 hardware because it's not a charging problem. It's a staying-with-you problem, and the simplest fix is still a tether, not a stronger magnet. A phone you don't have to check for is the actual upgrade, more than another watt of charging speed.

What a strap catches that a charger or mount can't

Qi2 accessories are built to hold a phone in a fixed spot, not to survive the phone leaving that spot, because that's outside their job. A mount that lets go on a rough trail, a wallet that peels off in a tight pocket, a charging stand that only works if the phone is already sitting still, all of them assume the phone stays put. A commute, a hike, or a stroller walk doesn't cooperate with that assumption.

This is where Phone Leash and Phone Strap do work that no magnet accessory touches. Both are fine-woven polyester, not elastic, built to hold weight and tension rather than stretch under it. The anchor is a self-adhesive mount that goes on the phone's case, not the phone itself. That detail matters: a case is required for any Phone Loops product, since the anchor needs a surface built to take daily wear. Everything in our lineup mounts to the case, never to bare glass. Once the anchor is on, the strap does the one job a Qi2 mount was never designed to do: stay attached when the phone moves with you instead of sitting still on a charger.

Where Phone Loops fits in a Qi2 setup

None of this means skipping Qi2 gear. A good magnetic wallet or charging stand still earns a spot on a desk or in a car. The point is that a Qi2 setup and a strap solve different problems, and only one of them is solved today. We'd rather see someone own fewer, better carry objects than stack five magnetic accessories trying to patch the same gap a strap already closes.

A Silicone Phone Strap, the one strap in our lineup that's actually elastic, pairs easily with a magnetic case since both just sit on top of the same mounting surface. Phone Leash works the same way for a crossbody setup, and Phone Strap covers the wrist version. Whichever Qi2 accessories eventually fill those five gaps, the strap underneath them is already solving the one thing none of those five ideas touch: making sure the phone is still there when the charger isn't.

FAQ

Do phone straps work with Qi2 chargers and magnetic cases?

Yes. The strap's anchor sits on the case, and Qi2 charging and magnet accessories mount on the same case surface, so there's no conflict between the two. Just make sure the anchor placement doesn't sit directly over the charging coil area if the case has one marked.

Can a Phone Loops strap replace a Qi2 mount or wallet?

Not exactly, since they solve different problems. A Qi2 mount or wallet holds the phone in a fixed spot for charging or carrying a card. A strap keeps the phone attached to you when it's not sitting on anything. Most people use both.

Do I need a case to use a phone strap?

Yes, every Phone Loops product requires a case. The anchor is self-adhesive and mounts on the case, not on bare glass, so there's always a case between the anchor and the phone itself.

Is the Phone Leash elastic like the Silicone Phone Strap?

No. Phone Leash and Phone Strap are both fine-woven polyester built to hold tension rather than stretch. Only the Silicone Phone Strap is elastic.

Why hasn't the Qi2 accessory market filled these gaps already?

Charging speed and magnet strength are easy to spec and market, so that's where most development time goes. Attachment and mounting reliability are harder to advertise, so they tend to lag behind even though they're the part people run into most often day to day.

Browse Phone Loops straps and find the one that pairs with your setup.